Transform Your Starter
Robot Arm Add-on Pack serves to transform your Starter Robot Kit to a robotic-arm tank. It contains all parts you need for building a robotic arms, including DC Motor-37, Robot Gripper, beams, timing pulleys, and hardware.
(Picture for reference only. please go through part list before purchasing.)
Devoted to Bring Fun
Composing of easy-to-assemble mechanical parts, color-labelled electronic modules, and a nimble gripper, controlled by IR remoter controller, this pack aims to bring more fun: pick up a bottle of water and get it delivered under your command.
Large Open-Width Gripper
The gripper included in this pack is capable of opening an impressive 3" (67mm) wide. It enables you to grip items of various sizes according to your needs.
The inner N20 screw motor of the gripper included in this pack will automatically stop running when the gripper is fully open or closed. This protects the screw motor from short-circuits and over-current, ensuring long-time use of the gripper.
We provide manual for assembling the Robotic Arm, click the link below to view: Guide for Assembling the Robotic Arm
If you have any questions about this product or you need technical support, please post it in our forum.
The Socket Cap Screw in this pack is button head socket cap screw which shall be used together with 2.5mm HEX Screwdriver (also included in this pack). Button Head Socket Cap Screw, as a new type socket cap screw, has smaller head that can solve most interference problems between components.
|1 x Beam 0824-64||1 x Timing Pulley 90T||2 x Nylon lock Nut 4mm|
|1 x Beam 0824-80||1 x Timing Belt 123T||4 x Countersunk Screw M3x8|
|3 x Beam 0824-96||3 x Linear Motion Shaft D4x88mm||12 x Headless Set Screw M3x5|
|3 x Beam 0808-168||8 x Shaft Collar 4mm||6 x Plastic Ring 4x7x2mm|
|3 x Plate 3x6||1 x Flange Bearing 4x8x3mm||1 x Me Dual DC Motor Driver|
|1 x DC Motor-37 Bracket B||16 x Socket Cap Screw M4x8||2 x 6P6C RJ25 cable-20cm|
|1 x DC Motor-37 12V/50RPM||14 x Socket Cap Screw M4x14||1 x HEX Screwdriver 2.5mm|
|1 x Strong Robot Gripper||6 x Socket Cap Screw M4x22||1 x HEX Allen Key 1.5mm|
|1 x Timing Pulley18T||8 x Nut M4|
Payment can be made by either PayPal or Bank Transfer, whichever customers would like to use.
The advantage of using PayPal is the timeliness, while the disadvantage is the relatively high commission fee charged by PayPal. Therefore, PayPal is usually recommended for order of small amount.
In terms of Bank Transfer, it will take longer time, even one week to the maximum; however, the handling charge is lower to some extent; so, Bank Transfer is preferred when the order value is large.
Delivery will be made within 1-2 working days after the receipt of payment. Since the commodities will be shipped through forwarder, the tracking number may sometimes be updated on the third working day. After we get to know the tracking number, we will update on our website and at the same time, the customer will be reminded via mail. Otherwise, customers can log onto "my account" to view the order status via "view order status".
Makeblock abides by applicable laws and policies and will make declaration on true condition.
All Makeblock commodities are exported through Hong Kong (free trade port); therefore, customers are not required to pay any export tariff. When commodities arrive at the destination, some will be checked by the customs and certain tariff shall be paid or not, depending on the provisions and operations of each country. Since all the import tariffs depend on local policies, customers are required to undertake related expenses at the destination port, if any.
If you have any doubts about local tariff policies and potential tariffs, please refer to http://www.dutycalculator.com/new-import-duty-and-tax-calculation/saved_calculations/view_details/194962255/. Note: the information stated on the website is only provided for reference and Makeblock will not be liable for the final tariff and estimated tariff.
Basically, Makeblock will provide express services where the courier services are available. If you have any related questions, please feel free to contact us via firstname.lastname@example.org.
For international express, PO BOX is not allowed; please indicate complete address (other than PO BOX), including domicile, postal code, addressee and contact information.
For any questions about the use of products, please view the related FAQ or seek relevant solutions at our forum http://forum.makeblock.cc/. Many customers that may have the same questions with you may have raised such questions and have been answered at the forum. Meanwhile, if you need relevant product information, please search at http://learn.makeblock.cc/. We have stored the information on all products here and classify them by products. If you are unable to find a solution at the above forum and learn, please send an email to email@example.com, professional technical customer service personnel will answer your questions within 2 working days.
If you have any questions about the order or product quality, please send an email to firstname.lastname@example.org, we will deal with your questions within 2 working days.
Makeblock encourage and appreciate your share of your great ideas and creations with us and other people who love creation as you.
Time effectiveness& conditions: The commodityisunopened within 7 days from the date of receiptand can be resold.
1). Send an email with subject indicating "Applications for Returns and Replacement" to email@example.com.At the same time, the mail shall specify:
a. Where the commodity was purchased (makeblock official website /Amazon outlets /Taobao outlets/Jingdong outlets);
b. Order No.;
c. Tracking No..
2). Within 2 working days after receiving the e-mail, Makeblock will verify and give a proposal for solving problem according to the actual condition.
3). For the commodity needs to be returned, the customer, after well-packaging the same and filling in corresponding information, shall send the commodity to the location designated by Makeblock; and meanwhile, notify Makeblock of the tracking number by mail.
4). After confirming that the commodity received complies with the returns and replacement conditions, Makeblock will refund within three working days.
Expenses: Regarding the applications for returns and replacement for non-quality issues, all the freight and related costs, including but not limited to tariffs, shall beundertaken by the customer. (Note: Payment upon arrival is not allowed.)
Refund: Corresponding refund will be returned to the account through which the customer purchased the commodity.
Time effectiveness: Declaration of parts missing and defective made within 7 days from the date of receipt is valid is valid. Please timely check the commodity after the receipt thereof.
1). Please send an email with subject indicating "Parts missing(or defective)" to firstname.lastname@example.org. At the same time, the mail shall specify:
a. Where the good was purchased (makeblock official website / Amazon outlets / Taobao outlets / Jingdong outlets);
b. Order No.;
c. Tracking No.;
d. Specific description on the missing or defective parts and quantity thereof. (Note: for names of the parts, please refer to the Parts List); e. return address (PO box and mail addresses are not available;the ZIP code is required), contact person and contact number.
2). Within 2 working days after receiving the e-mail, Makeblock will verify and give a proposal for solving problem.
3). For the verified parts missing or defective, Makeblock will arrange repalcementfor the missing or defective parts. (Note: Makeblock will select a courier according to the actual situations.)
Expenses: Makeblock will undertake the corresponding freight.
1). Please send an email with subject indicating "Repairs" to email@example.com. At the same time, the email shall specify:
a. Where the commodity was purchased (makeblock official website / Amazon outlets / Taobao outlets / Jingdong outlets);
b. Order No.;
c. Specific description on the damaged parts and quantity thereof. (Note: for names of the parts, please refer to the Parts List);
d. Return address (PO box and mail addresses are not available and at the same time, the ZIP code is required), contact person and contact information.
2). Within 2 working days after receiving the e-mail, Makeblock will verify and give a proposal of solving problem.
3). For those confirmed by Makeblock, it will provide repairs or make replacement according to actual conditions.
4). For the damaged products out of warranty, Makeblock also provides technical support. Limited maintenance with customer bearing all related cost (freight, maintenance cost, customs tax and so on) will be provided up to Makeblock's analysis of products.
1. Associated expenses arising from the repairs of the commodity within the warranty period and scope will be undertaken by Makeblock. (Note: Makeblock will select a courier according to actual situations.)
2. For the damages falling beyond the warranty period or scope, Makeblock will provide lifelong free technical assistance and free repairs. Relevant freight and tariff are on the account of the customer.
Remark: to better judge the reason, Makeblock may require the customer to send back the damaged commodities for analysis, judgment and improvement, and Makeblock will return the expenses arising therefrom to the customer's account.