XY Plotter Robot Kit (with Electronic Version)
  • XY Plotter Robot Kit (with Electronic Version)

XY Plotter Robot Kit (with Electronic Version)

US $299.99

SKU: 90014 Weight: 4385.00 Gram
QTY: (In Stock) 1058

Product Description

Description:

XY Plotter Robot Kit is a drawing robot that can move a pen or other instrument to draw digital artwork on flat surface. It can also be developed into a laser engraver by adding the Laser Engraver Upgrade Pack.

 

Part List:

1 x Beam 0824-16

4 x Beam 0824-48

1 x Beam 0824-80

4 x Beam 0824-96

2 x Beam 0824-112

2 x Beam 0824-496

1 x Beam 0808-80

2 x Beam2424-504

2 x Bracket 3x3

5 x Plate 3x6

5 x Bracket U1

3 x Belt Connector

2 x Stepper Motor Bracket B

1 x K-Power 9g Micro Servo

10 x Shaft Collar 4mm

1 x Flexible coupling 4x4mm

4 x Linear Motion Shaft D8X496mm

6 x Linear Motion Slide Unit 8mm

10 x Flange Bearing 4x8x3mm

1 x HEX Screwdriver 2.5mm

1 x Cross Screwdriver 3mm

2 x HEX Allen Key 1.5mm

1 x Wrench 7mm

50 x Nut M4

10 x Countersunk Screw M3x8

26 x Headless Set Screw M3x5

16 x Plastic Rivet R4060

6 x Plastic Rivet R4100

1 x 6P6C RJ25 cable-35cm

2 x 6P6C RJ25 cable-50cm

1 x Wall Adapter Power Supply - 12VDC

1 x USB A-Male to B-Male Cable

1 x Base Bracket

4 x Me Micro Switch B

1 x 9g micro servo bracket

1 x Linear Motion Shaft D4x512mm

1 x Linear Motion Shaft D4x80mm

3 x Nut M2

3 x Cross recessed pan head screw M2×10

30 x Socket Cap Screw M4×14

28 x Socket Cap Screw M4×16

12 x Socket Cap Screw M4×22

36 x Socket Cap Screw M4×8

6 x Cuttable Linkage 3

30 x Nylon cable ties 2*100

5 x Rubber band

1 x Me Orion(Base on Arduino UNO)

2 x Me Stepper motordriver

3 x RJ25 Adapter

2 x 6P6C RJ25 cable-20cm

6 x Timing Pulley18T

3 x Open-end Timing Belt (1.3m)

2 x D Shaft 4x56mm

1 x Threaded Shaft 4x39mm

18 x Socket Cap Screw M4×30

20 x Plastic Ring 4x7x2mm

2 x 42BYG Stepper Motor

 

Features:

  • This kit consists of over 60 kinds of components from Makeblock, including beams, brackets, motors, etc. Here's the picture of all the components.
  • XY Plotter V2.0 can be controlled by 2 software, mDraw and Benbox.
  • mDraw is a cross-platform open-source software developed by Makeblock
  • Compatibility: mDrawBot (mScara, mCar, mEggBot, mSpider), XY Plotter kit (servo mode, laser mode)
  • OS Environment: Windows, Mac
  • Supported File Type: *.svg, *.bmp (convert to *.svg)
  • Benbox is compatible with both servo mode and laser mode of XY plotter. One of the best things about using Benbox is that Benbox support gray-scale engraving, and editing figures and characters within the software.

 

If you have any questions about this product or you need technical support, please post it in our forum.

Reviews about XY Plotter Robot Kit (with Electronic Version)

Average rating: 0 reviews
Total reviews: 0