In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor.
|Rated voltage||6.0V (DC)|
|No-load current||≦ 200 mA|
|No-load speed||185±10% rpm|
|Rated load||0.9 Kgf.cm|
|Rated current||≦ 550mA|
|Rated speed||135±10% rpm|
|Locked-rotor current||≥ 2.0 A|
Height/Width/Length: 200 x 140 x 30mm (7.9 x 5.5 x1.2inch)
1 x Me Encoder Motor Driver
2 x Optical Encoder Motor-25 6V/185RPM
2 x Encoder Motor Wire
Before using, please make sure there is enough distance between the white sensor and the black coding disk as below picture for the white sensor may be damaged by the rotating part.